万兆网和千兆网ubuntu环境下的配置

第一个是万兆网,没有连线,第二个是千兆网,连线了。

scutech@infokist-arm:~$ ethtool enp130s0f1
Settings for enp130s0f1:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseT/Full 
	                        10000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseT/Full 
	                        10000baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Speed: Unknown!
	Duplex: Unknown! (255)
	Port: FIBRE
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: no
scutech@infokist-arm:~$ ethtool enp125s0f0
Settings for enp125s0f0:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Advertised pause frame use: Symmetric Receive-only
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	                                     1000baseT/Full 
	Link partner advertised pause frame use: Symmetric Receive-only
	Link partner advertised auto-negotiation: Yes
	Link partner advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Link detected: yes
scutech@infokist-arm:~$ 

up以后才能看到网卡link

scutech@infokist-arm:~$ ifconfig enp130s0f0 up
SIOCSIFFLAGS: Operation not permitted
scutech@infokist-arm:~$ sudo ifconfig enp130s0f0 up
[sudo] password for scutech: 
scutech@infokist-arm:~$ sudo ifconfig enp130s0f1 up
scutech@infokist-arm:~$ ethtool enp130s0f0
Settings for enp130s0f0:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseT/Full 
	                        10000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseT/Full 
	                        10000baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Speed: 10000Mb/s
	Duplex: Full
	Port: FIBRE
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes
scutech@infokist-arm:~$ ethtool enp130s0f1
Settings for enp130s0f1:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseT/Full 
	                        10000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseT/Full 
	                        10000baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Speed: Unknown!
	Duplex: Unknown! (255)
	Port: FIBRE
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: no
scutech@infokist-arm:~$ sudo ip addr add 10.168.85.145/24 dev enp130s0f0
scutech@infokist-arm:~$ ifconfig
enp125s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.87.145  netmask 255.255.255.0  broadcast 192.168.87.255
        inet6 fe80::7a17:beff:fec4:39c1  prefixlen 64  scopeid 0x20<link>
        ether 78:17:be:c4:39:c1  txqueuelen 1000  (Ethernet)
        RX packets 12017  bytes 769909 (769.9 KB)
        RX errors 0  dropped 628  overruns 0  frame 0
        TX packets 1632  bytes 150951 (150.9 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp130s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.168.85.145  netmask 255.255.255.0  broadcast 0.0.0.0
        inet6 fe80::210:caff:feee:126  prefixlen 64  scopeid 0x20<link>
        ether 00:10:ca:ee:01:26  txqueuelen 1000  (Ethernet)
        RX packets 1  bytes 243 (243.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 10  bytes 796 (796.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp130s0f1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 00:10:ca:ee:01:27  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 316  bytes 23997 (23.9 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 316  bytes 23997 (23.9 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

scutech@infokist-arm:~$ ping 10.168.85.178
PING 10.168.85.178 (10.168.85.178) 56(84) bytes of data.
64 bytes from 10.168.85.178: icmp_seq=1 ttl=64 time=0.348 ms
64 bytes from 10.168.85.178: icmp_seq=2 ttl=64 time=0.147 ms
^C
--- 10.168.85.178 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1003ms
rtt min/avg/max/mdev = 0.147/0.247/0.348/0.101 ms
scutech@infokist-arm:~$ 
姚远ACE CSDN认证博客专家 ACE 华为云 MVP
Oracle ACE,华为云 MVP,Oracle10g,12c OCM; MySQL 5.6,5.7,8.0 OCP;CCNA; EMC Certified; IBM P Certified; RHCE; SQLServer 764; DB2 Certified; TOEIC 890;获得过两次国家部级科技进步奖;发明过两项计算机专利。微信:yaoyuanace 邮箱:yaoyuanace(at)qq.com
已标记关键词 清除标记
相关推荐
©️2020 CSDN 皮肤主题: Age of Ai 设计师:meimeiellie 返回首页